Brands
Categories
Dekguard E-Coat Sealer is an acrylic sealer undercoat suitable for sealing and undercoating interior paper-faced wallboards, cementitious surfaces, renders, and hardboards. It is ideal for plasterboard and is used as a protective primer with Dekguard E-Coat to protect against carbonation and chloride ion attack. It is suitable for both new and old concrete and for application in confined areas.
See More Details
Lokfix EP is a two-component, solvent-free, epoxy-resin anchor fixation system designed for threaded rods and reinforcing bars in uncracked concrete. It cures to securely fix a variety of steel components into concrete and solid masonry. It can also be used as a general-purpose structural adhesive for concrete.
See More Details
Concure WB is a water-based concrete curing compound based on a low viscosity wax emulsion. It is supplied as a white emulsion which forms a clear film on drying. When first applied to a fresh cementitious surface, the emulsion breaks to form a continuous, non-penetrating white coating. This dries to form a continuous clear film which provides a barrier to moisture loss, ensuring more efficient cement hydration, improved durability, and reduced shrinkage. Concure WB white is also available, containing a white pigment based on titanium dioxide for reduction of solar temperature gain.
See More Details
Conplast SP490-S is a high-range water-reducing admixture designed for use in high-quality concrete where workability retention and low water content are crucial. It is particularly suitable for piling, mass concrete pours, and applications requiring good pumpability and improved cohesion. The admixture is based on selected synthetic and organic polymers, dispersing fine particles in the concrete mix to enhance the effectiveness of the water content. This allows for significant increases in strength and improved durability. It is chloride-free and safe for use in reinforced and prestressed concrete.
See More Details
Fosroc Conbextra GP is a high-flow, non-shrink, cementitious grout. It is supplied as a ready-to-use dry powder, composed of Portland cements, graded fillers, and chemical additives. The addition of a controlled amount of clean water produces a free-flowing grout for gap thicknesses from 10mm up to 100mm. The low water requirement ensures high early strength and long-term durability. Conbextra GP is designed to provide controlled expansion in the plastic state and will not segregate or bleed.
See More Details
Conbextra GP2 is a high-flow, non-shrink, cementitious grout supplied as a ready-to-use dry powder. When mixed with water, it produces a free-flowing grout with excellent strength and durability, suitable for gap thicknesses up to 100mm. It features a gaseous expansion system that compensates for shrinkage and settlement in the plastic state, ensuring maximum contact with load-bearing areas.
See More Details
Conbextra LA GE is a high-strength, non-shrink, cementitious grout designed for applications requiring excellent flowability and penetration. It is suitable for gap thicknesses up to 75mm and can be mixed to a flowable consistency. The product is a blend of Portland cements, graded fillers, and chemical additives that ensure high early strength and long-term durability.
See More Details
Conbextra MCG is a ready to use cementitious grout with modified pre-graded fillers, aggregate, micro silica and additives. The special formulation controls expansion in the plastic state to minimize shrinkage, segregation and bleeding. It is a free flow non-shrink cementitious grout used for filling gap thicknesses between 25 and 125mm.
See More Details
Fosroc Concure WB200 is a water-based concrete curing compound designed to retain moisture in freshly cast or exposed concrete surfaces. It forms a temporary membrane, preventing rapid water evaporation, which is crucial for the curing process. It is available in both clear and white variants.
See More Details
