Do You Have Any Inquiries?
Do You Have Any Inquiries?
Brands
Categories
Brushbond Crystal Plus is a crystalline capillary waterproofing system. It is a blend of proprietary Portland cements, aggregates, and specialized chemicals. When moisture is present, the active chemical additives penetrate the concrete and react with free lime to produce insoluble crystals. This crystalline growth reduces concrete porosity by blocking capillaries and filling hairline cracks, providing long-lasting impermeability.
See More Details
High-technology polymer modified elastomeric waterproofing membrane system for concrete masonry surfaces.
See More Details
Brushbond Plus 110 is a two-component polymer-modified cementitious waterproof coating for concrete and masonry. It is applied to concrete and mortar structures to prevent water infiltration and forms an easy-to-brush coating that can be applied by roller, stiff brush, spray, or trowel. It provides excellent waterproofing, high strength, density, resiliency, and adhesion.
See More Details
Conbextra EP150 is a solvent-free, epoxy resin-based product designed for assisted and free-flow grouting of gaps ranging from approximately 10 mm to 150 mm. It is a three-component system consisting of a base resin, a liquid hardener, and specially graded inert fillers. The components are supplied in correct mix proportions for whole-pack mixing on site.
See More Details
Conbextra EP80E is a free-flowing epoxy resin grout designed for grouting of gap thicknesses from 10 to 80mm. It is a three-component system consisting of base resin, liquid hardener, and specially graded inert fillers. The product is supplied in the correct mix proportions for whole-pack mixing on site.
See More Details
Nitoflor FC150 is a solvent-free, high-build epoxy resin floor coating that provides a hard-wearing, chemical and abrasion-resistant floor finish. It is suitable for use in wet areas where a high degree of resistance to chemicals, oils, and grease is required. The system consists of pre-weighed base and hardener components. A slip-resistant texture can be provided by the use of Nitoflor Antislip Grains.
See More Details
Nitoprime SF is a two-component, solvent-free epoxy primer that acts as a stabilizing primer for a range of epoxy finishes. It is designed for use on cementitious and concrete substrates where epoxy resin coatings and screed systems are applied. It provides excellent adhesion and seals the substrate in preparation for subsequent flooring systems.
See More Details
Brushbond 110 is a two-component acrylic polymer modified cementitious coating supplied in ready-to-mix kits. It can be applied by brush, roller, spray, or trowel to obtain the desired texture. It is used to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen, water, and water vapor, and can be used to produce vapor barriers. It is also recommended for protecting other cementitious substrates and masonry for new and existing structures.
See More Details
Fosroc Brushbond 200 is a two-component acrylic polymer modified cementitious coating. It is supplied in ready-to-mix kits and can be applied by stiff brush, roller, spray, or trowel.
See More Details