Brands
Categories
Ultraplan Eco 20 is a rapid hydrating, fast-drying, self-levelling smoothing compound. It is a grey powder made of special cements with fast setting and hydrating properties, selected graded silica sand, resins, and special additives developed in MAPEI Research Laboratories. When mixed with water, it becomes a fluid, easily workable, and perfectly self-levelling compound with high bond strength to the substrate. Ultraplan Eco 20 can be applied in thicknesses up to 10 mm per layer without shrinkage, cracking, or crazing, and develops good compressive and flexural strength, as well as resistance to indentation and abrasion. For thicknesses greater than 10 mm (up to a maximum of 20 mm), it may be necessary to add graded sand or use a product more suitable for thicker sections, such as Ultraplan Maxi. Due to its rapid hydration formulation, subsequent installation of most types of flooring can begin approximately 12 hours after application, regardless of thickness. For resilient flooring, a minimum of 24 hours is recommended before application. It has very low emissions of volatile organic compounds (EMICODE EC1 R Plus) and is harmless to the health of the installer and the end-user.
See More Details
Ultraplan Maxi is an ultra-fast hardening, self-levelling smoothing compound. It is a grey powder composed of rapid setting and hydrating special cements, selected graded silica sand, resins and special admixtures, developed in MAPEI Research Laboratories. When mixed with water, it becomes a highly fluid, easily workable mortar with perfect self-levelling capacity, high adhesion to the substrate, and ultra-rapid drying. It can be applied with an automatic pressure pump. Ultraplan Maxi can be spread in thicknesses from 3 to 40 mm per coat without shrinkage, cracking or crazing. It develops very high compressive and flexural strength, as well as resistance to indentation and abrasion. The product is ready to receive flooring as soon as it has dried, with the time depending on the thickness, environmental temperature, relative humidity, and substrate absorption. Ultraplan Maxi has very low emissions of volatile organic compounds (EMICODE EC1 Plus).
See More Details
Washed, kiln-dried quartz sand for use with epoxy and polyurethane resin. It is available in various mixes in a granulometric curve and is used to create protective coatings, for grouting and repair work, etc.
See More Details
Mapei UltraCare 5-Sides Sealer is a water-based, penetrating sealer designed for natural stones. It provides protection against water and stain absorption, ideal for use on marble, granite, limestone, slate, and travertine before installation with cement-based adhesive or thick bed mortar. It allows moisture vapor transmission and does not affect the bonding of the stone to the substrate.
See More Details
Ultrabond Eco 375 is a solvent-free, acrylic adhesive in water dispersion, formulated as a ready-to-use light beige paste. It offers a good balance between quick initial tack and a long open time, forming a tough, elastic film once set. It is characterized by being easy to apply, with excellent wetting properties even on difficult coverings, high peel strength, and very good adhesion to all PVC backings. It is also resistant to castor wheels, non-flammable, and has very low VOC emissions (EMICODE EC1 Plus), making it harmless to the health of installers and end-users. It is suitable for bonding homogeneous and heterogeneous PVC floor coverings in sheets, CV and multilayer PVC floor coverings, semi-flexible vinyl floor tiles, and textile floor coverings with latex-primed, PVC, and polyurethane foam backings, as well as flocked textile flooring and PVC wall coverings. It is also suitable for use on underfloor heating systems.
See More Details
Primer G is a synthetic resin-based primer in water dispersion with a very low content of volatile organic compounds (VOC). It is used for treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling. It consolidates the surface, improves adhesion, and reduces substrate absorbency, preventing chemical reactions that can cause tiles to detach.
See More Details
Primer SN is a two-component, fillerized epoxy primer designed to enhance adhesion of multi-layer flooring systems, such as Mapei’s Mapefloor™ polyurethane and epoxy systems, and also serves as a primer for cement screeds and epoxy mortars. It penetrates well into the substrate, providing an excellent mechanical and chemical bond, and can be applied to slightly damp concrete surfaces. It is also effective for sealing cracks.
See More Details
Mapei Planigrout 300 ME is a three-component, fluid epoxy resin grout specifically developed for heavy-duty and structural support under both static and dynamic situations. It is a free-flowing, self-leveling grout with exceptional bonding strength, as well as chemical and mechanical resistance characteristics. It is suitable for both internal and external applications.
See More Details
Mapei Planicrete is a synthetic-rubber latex admixture designed to improve the mechanical and adhesive properties of cementitious mixes, including screeds, renders, and smoothing layers. It is also used to create highly adhesive cement-based bonding slurries.
See More Details
